China Manufacturer of Pipe Chain Feeding bulk roller chain

Product Description

Product introduction

The ongoing conveying tools for conveying powder, small granule, little block and other bulk supplies can be blended horizontally, obliquely and vertically. In the shut pipeline, the chain piece is utilised as the driving part to move animal materials alongside the pipeline. When conveying horizontally, the materials particles are pushed by the chain piece in the path of motion. When the inner friction in between the material levels is greater than the exterior friction between the content and the pipe wall, the materials moves ahead with the chain piece to sort a secure substance movement When conveying vertically, the material particles in the pipe are pushed upward by the chain piece. Since the reduce feeding helps prevent the higher materials from sliding, the lateral facet force is produced, so the internal friction of the substance is enhanced. When the inner friction among the materials is better than the friction amongst the material and the inner wall of the pipe and the substance bodyweight, the content is transported upward together the chain piece, forming a ongoing content circulation.
Pipe conveyor is also named pipe drag chain conveyor. When functioning, the chain with disk scraper moves in the closed pipeline, and the scraper pushes the content ahead. It is an energy-saving and powerful ongoing powder particle conveying tools.

Item pictures

Application area

one. Plastic market: PVC, PP, PE powder, Stomach muscles, Pc, PP, PE particles.
2. Fine chemical market: dye, pigment, coating, carbon black, titanium pigment, iron oxide, ceramic powder, heavy calcium carbonate, fine calcium carbonate, bentonite, molecular sieve, porcelain clay, silicon powder, energetic carbon.
three. Mining: urea, ammonium chloride, ammonium bicarbonate, soda powder, sound pesticide, tungsten powder, fish oil, copper powder, coal powder, substantial phosphate, bauxite, etc.
4. Constructing materials: cement, clay, yellow sand, quartz sand, clay powder, silicon, lime powder, dolomite powder, wooden chips, glass fiber, silicon dioxide, painting powder, and many others.
5. Meals business: flour, starch, cereals, milk powder, meals additives, and so on.

Functionality traits

1. Compact framework, small place occupation, can adjust the conveying route in 3 dimensions, independent of terrain, angle and peak The conveying procedure is carried out in a closed pipeline, and the materials are cost-free of dust
two. The conveying method is well balanced, there is generally no internal movement among supplies, and there is small harm to make certain the top quality of resources, which is suitable for CZPT components
three. It will not trigger program blockage and is suitable for conveying materials of a variety of forms
four. The transportation of combined materials will not trigger content stratification
5. Massive conveying ability, low strength use, drastically decreasing gear running costs
six. All shifting areas run in a confined place
7. It can recognize extended-length transmission
8. Several content inlets and shops can be deployed at will to meet up with method demands
nine. It is easy to realize centralized handle and improve automation.

The pipe chain conveyor is a ongoing conveying equipment for powdery, tiny particles, toxic and dust prone supplies. It is composed of a closed pipe. At the stop of the pipe, there are driving devices and tensioning devices respectively. On the conveying pipe, there are inlet and outlet respectively. The conveying chain, underneath the traction of the driving system of the transmission mechanism, moves the resources coming in from the feeding port along the interior wall of the conveying pipe to the discharging port for discharge, therefore completing the conveying of resources.
–Dust avoidance: horizontal transportation, vertical lifting, appropriate angle or other angle turns in shut pipes to avoid dust from flying and the surroundings from being polluted.

–Energy preserving: reduced electrical power usage and large conveying capability. Underneath the identical conveying condition, energy use can be decreased by 50~80% in comparison with air conveying, which can drastically reduce the conveying operation cost.

–Compact: light in physical appearance, compact in composition, modest in profession spot, not limited by terrain, handy in transportation direction, multi-stage feeding and multi-position discharging can be adopted.

–Handy: effortless to function and use, lowering labor intensity.

Merchandise class

Organization profile

QIANGHAN Equipment (HangZhou) CO.,LTD is fully commited to the layout and manufacture of powder unpacking and unloading, conveying and loading, powder valve gear and relevant supporting gear and goods are widely utilised in chemical, foodstuff, drugs, feed, cosmetics and other industries. 
Strong drought has expert technological staff and a good quality work crew, which can well timed offer customers with best following-income services. Survive with top quality, build with provider, constantly adhere to the basic principle of agreement and trustworthiness. Our goods excellent in quality and reasonably priced in cost. Welcome new and old customers to the manufacturing unit!


Packing&Shipping and delivery


Q:What is the shipping time ?  
A:Our delivery time is in 3-7days following we get your payment For big qty mass buy, the time should be confrimed by quantity.
Q: How about the Guarantee time ?  
A:Our guarantee time is twelve months right after you get our merchandise. All products are supplied with lifelong specialized providers and assist.

Q:How about the payment terms ?  
A:You can select T/T, Western union or Paypal.

Q: Do you give samples ?  
A: Of course, we have supplies in stock to aid you to get the samples as soon as we can.  

Q:Can I have my personal brand of the items?  
A:Of course. We provide OEM solutions these kinds of as product’s material, dimension, colour, and many others. 

After-sales Service: Guarantee
Warranty: Guarantee
Structure: Conveyor System
Material: Stainless Steel
Material Feature: Heat Resistant
Application: Chemical Industry, Grain Transport


After-sales Service: Guarantee
Warranty: Guarantee
Structure: Conveyor System
Material: Stainless Steel
Material Feature: Heat Resistant
Application: Chemical Industry, Grain Transport



buy drive chain

Buying a drive chain requires a certain understading of its characteristics. This article discusses the different types of chains available, including Silent, Flat-top, and Duplex. By the end of this article, you should have a basic understanding of what each type of chain is for. First, here are some basic rules to keep in mind when shopping for a chain. To find the drive chain that best suits your needs, read on.

roller chain

Choosing the right roller chain for your drive chain depends on several factors. First, you have to determine the motor horsepower and rpm for the small drive sprocket. These values ​​determine the size of the chain and the number of teeth on the drive sprocket. Next, you need to determine the size of the conveyor chain, it can be the horizontal, vertical, or curved radius. Depending on your specific needs, you can also choose between two-strand or three-strand chains.
The roller chain of the drive chain must be properly tensioned. It should also have a proper lubrication system. Chain sag should not exceed two to four percent of the center distance (the distance between the two axles). Also, it shouldn’t make any unusual noises or obvious problems. One of the main reasons for excessive wear is the size of the load. Each chain has a specified maximum working load.
The maximum roller chain load must be less than 1/9 or 6 times the tensile strength of the drive chain. This amount should not exceed this threshold, as exceeding this level will result in chain plate fatigue. To avoid this, you should use a roller chain with a higher number of strands. Also, for high power requirements, a roller chain with a higher number of strands is recommended. One final tip for choosing a drive chain: it should not be used when there is a high risk of corrosion or rusting.
The materials used to manufacture roller chains vary according to the specific application. Common materials include steel and stainless steel. However, stainless steel is used in food processing machinery and other environments that require lubrication. Brass and nylon are also sometimes used. These factors determine the selection of suitable materials for the drive chain. If you are not sure which material to use, you can consult an industry professional. These professionals will help you choose the right chain for the job at hand.

mute chain

The design of the silent transmission chain is as follows: the large chain plates 2 are stacked one on top of the other in the direction of the chain length. The connecting rods are connected by connecting pins 3. The outermost and central guide plates 4 are fastened to the connecting pins 3 by means of rivets. This construction helps minimize friction on the sliding surfaces of the chain. Chainplate 2 of the silent transmission chain is usually made of stainless steel.
The link plates are made of steel and have a rectangular shape with pinholes 41. These guide plates have no teeth but have curved surfaces that guide the silent drive chain on the sprockets. In addition, the rear portion of the guide plate is higher than the portion of the chainplate. This feature improves pitch balance. The present invention is also applicable to silent transmission chains using rockers.
When it comes to chain design, it’s important to remember that silent drive chains are often used in automotive engines, especially timing and cam drives. This type of drive reduces noise and vibration due to its low engagement angle and links engagement with the sprocket. However, these applications are not limited to timing and cam drives; they can also be used for front-wheel power transmission. For example, silent drive chains are designed to resemble those used in NASCAR racing engines.
The design of the silent drive chain is based on the structure of the roller chain. Its components are standardized and manufactured according to pitch. There are single-row and multi-row versions. Quiet chains, also known as inverted tooth chains, are shaped to reduce noise from stretching. It’s also designed to minimize the amount of friction caused by small changes in pitch. Its teeth don’t slide against each other, so the chain is smoother and more durable.

flat top chain

One of the important parts of the flat top chainplate system is the hinge pin, which is used to fix the chainplate and is responsible for the smooth and efficient conveying of the chainplate. There are several types of hinge pins, including single hinge pins and double hinge pins. The single hinge pin is suitable for the chainplate with a small span and small bearing capacity, and the double hinge pin is suitable for the chainplate with a large span and high bearing capacity.
The side bending flat top chain is suitable for conveying large and medium workpiece pallets. They can be made of steel or plastic, each with its own advantages. Both chainplates are designed to convey material smoothly. Side curved flat-top chains can be used on straight conveyors. They have a low coefficient of friction and can transport weights up to 1.2 kg/cm. They can also be combined with HD profiles.
Flat top drive chains are usually made of plastic material and come in two types: tabletop chains and buffer chains. They come in a variety of widths, but the most popular are standard widths, ranging from 3.25 inches to 12 inches. MatTop chains are usually shipped in 10-foot lengths. They come in different styles, but they all have the same basic specs. Tabletop chains are designed for general conveying, while pad chains are used for specific applications. Solid top chains are suitable for conveying bulk materials, while wide pad chains can handle large volumes of fluids and/or solid-solid mixtures.
These chain conveyors can be used to convey, connect or lift small items. This type of chain is especially useful in industries where the product is hot or greasy. The modular design of these chains allows them to be configured in three dimensions, making them suitable for production changes and transitions. They also help reduce slack in the chain. Flat top chains are commonly used in final assembly and mechanical or paint restoration in the automotive industry.

double chain

Besides the roller chain, another type of chain drive is the double drive chain. This type of chain consists of a series of short cylindrical rollers connected together by side links and driven by gears called sprockets. This type of chain is very reliable and only requires a tractor with a high rpm PTO. It is manufactured by CZPT and is available in many different sizes and finishes.

Self-lubricating chain

Self-lubricating drive chains are the ideal solution for applications that do not require the relubrication of conventional chains. This maintenance-free roller chain features fully heat-treated components that increase the chain’s fatigue resistance and strength. It’s sintered alloy bushings are oil-impregnated, reducing the chance of premature wear and elongation. Its self-lubricating properties enhance its durability and work well even in hard-to-reach places.
CZPT self-lubricating roller chains feature preloaded sintered steel bearing pins and oil-impregnated sintered bushings. These chains are drop-in replacements for standard roller chains and run on the same sprockets as standard chains. In addition to being maintenance-free, self-lubricating roller chains are compatible with most existing sprockets and are ideal for demanding applications.
The O-ring chain concept was used to develop self-lubricating systems. It has two or more annular grease storage chambers. A self-lubricating bushing roller chain has an oil reservoir between its pin chain and the roller chainplate. A grease seal between these two plates isolates the moving parts and keeps the joints well lubricated. O-rings are made of special nitrile rubber, whose properties vary by application.
CZPT SLR conveyor chains and CZPT SLR drive chains have rollers on sintered bushings. CZPT SLR chains and SLR conveyor chains are self-lubricating and have a higher working load than standard ANSI chains. They may not be interchangeable with other self-lubricating chains from other manufacturers. Self-lubricating drive chains are the best solution for demanding industrial applications requiring heavy-duty, reliable conveying.

China Manufacturer of Pipe Chain Feeding     bulk roller chainChina Manufacturer of Pipe Chain Feeding     bulk roller chain
editor by czh 2023-01-17

Plate top chain

As one of the plate top chain manufacturers, suppliers, and exporters of mechanical products, We offer plate top chain and many other products.

Please get in touch with us for details.

Manufacturer supplier exporter of plate top chain.

Recent Posts